How To Root XXUBMJ3 Android 4.3 on Galaxy Note 3 LTE N9005 Official Firmware

How To Root XXUBMJ3 Android 4.3 on Galaxy Note 3 LTE N9005 Official Firmware

Today We’re gonna tell you how to root Galaxy Note 3  9005 with official XXUBMJ3 Android 4.3 firmware.

Simple Step-by-step guide to root Android 4.3 XXUBMJ3 official firmware on Galaxy Note 3 LTE N9005

Simple Step-by-step guide to root Android 4.3 XXUBMJ3 official firmware on Galaxy Note 3 LTE N9005

 

Samsung Galaxy Note Specifications

DisplayProcessorStorageRear Camera
5.70-inch1.9GHz32GB13-megapixel
ResolutionRAMOSFront Camera
1080×1920 pixels3GBAndroid 4.32-megapixel

Disclaimer: The tools, mentioned in this article belong to the respective owners or developers. Mediastaan.com or the author of this post will not be held responsible for any kind of damage that happens to your device while following this tutorial. You are advised to follow this tutorial of rooting Galaxy Note 3 LTE N9005  at your own risk. You need to make sure your Galaxy Note 3 LTE N9005 is on this firmware update before proceeding – Android 4.3 XXUBMJ3 Jelly Bean Official. Also this root method works only for the Galaxy Note 3 SM-N9005 with Qualcomm Snapdragon Quad-core CPU with LTE and not the octa core version

Things you need to do before starting :

  • Download Samsung Galaxy Note 3 USB drivers from here
  • Backup your important data .
  • Make sure you enable usb debugging mode in settings.
  • Make sure your Android device is charged up to 80-85% battery.
  • This root method tutorial is only for Galaxy Note 3 LTE N9005 (LTE, Qualcomm Snapdragon Quad-Core CPU). Please do not try on any other Galaxy Note 3 variants.
  • Make sure you backup all your data in your phone before proceeding as a precaution.
  • This root method requires Galaxy Note 3 to be on XXUBMJ3 Android 4.3 official firmware!
  • Your Galaxy Note 3 should be on an official firmware by Samsung, not a custom ROM.

 Step-By-Step Guide to Root XXUBMJ3 Android 4.3 on Galaxy Note 3 LTE N9005 Official Firmware: Step 1 – Download CF-Auto-Root Package   and extract the zip file anywhere on your desktop. Step 2 – Download ODIN v3.07 which will help you to root Android 4.3 this device 421499 Step 3 – Switch OFF your phone. Now go to Download Mode bye Pressing and holding the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to enter into Download Mode. Step 4 – Make sure you have your Samsung Galaxy Note 3 USB drivers installed on your computer. Step 5 – Now run  ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode. Step 6 – If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time. Step 7 – Now select the file that you have to flash/install on your phone. This file will be found from the extracted file in Step 1.

  • Click on ‘PDA’ and select the file ‘CF-Auto-Root-hlte-hltexx-smn9005.zip‘.

Step 8 – In ODIN, check the Auto Reboot and F. Reset Time options, if not already. Step 9 – Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete. Step 10 – After the installation is completed, your phone will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green. Step 11 – After you see the home screen, unplug your phone from the computer. NOTE: Sometimes the device may NOT boot into Recovery Mode automatically (as given in Step 10) and root your device. If that happens, do the entire procedure again.   To verify that the root package is installed correctly and working, download Root Checker app from Google Play Store.

[Source: ibtimes]

 

If you found this article helpful please give us a like or follow us on facebook

You may also like...

Free WordPress Themes